网址ju111十年信誉备用

   Category门类Trade-Mark类型Equivalent to China Standard是一样的国家标准Characteristics & application性质和使用Equivalent to AWS是一样的AWSHard-surfacing硬面堆焊D 667EDZCr-B-15HRc≥48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part.HRc≥48  ，耐腐耐温性涂层涂层、耐气蚀、抗老化的 。 堆焊鼓风炉料钟、破碎工艺机零部件D 802EDCoCr-A-03HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter.HRc38-47  ，耐温、耐蚀、耐腐耐温性涂层涂层 。 堆焊常温天气产品镗孔产品如热截段刃口ECoCr-AD 812EDCoCr-B-03HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve.HRc45-50  ，耐温、耐蚀、耐腐耐温性涂层涂层 。 堆焊常温天气产品镗孔产品如内然机阀ECoCr-BD 822HRc≥53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler.HRc≥53  ，耐温、耐腐耐温性涂层涂层  ，但抗的冲刺性好 。 堆焊工业网址ju111十年信誉备用拖动风扇嫩叶D 832EDCoCr-C-03HRc≥50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way.HRc≥50  ，耐温、耐腐耐温性涂层涂层 。 堆焊常温天气产品镗孔产品如热扎钢板导轨ECoCr-CD 842EDCoCr-D-03HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die.HRc28-38  ，耐蚀、抗热疲倦  ，存在操作硬底化性 。 堆焊热锻模Cast iron碳钢Z 308EZNiPure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool.纯镍  ，综合评估耐温性好 。 碳钢薄件及操作面补焊用  ，如数控磨床导卫ENi-ClZ 408EZNiFeIron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap.镍铁  ，力度高、韧度好 。 必要灰碳钢及球铁焊补用  ，如汽缸筒ENiFe-ClZ 508EZNiCu-1Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load.镍铜  ，易操作  ，但抗裂性也就不好 。 不受压的灰碳钢操作面及砂眼补焊ENiCu-BCopper alloys铜和各种铝硬质碳素钢质钢属属材料Cu 107ECuRed copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row.红铜  ，耐细颗粒物  ，这里的海水浸蚀  ，导电性好 。 红铜不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工用  ，如导电铜排ECuCu 207ECuSiSilicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.硅白铜  ，耐蚀、力度高 。 铜、硅白铜及红铜不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工用ECuSiCu 227ECuSnBTin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass.锡磷白铜  ，耐蚀、力度高 。 铜、硅白铜及红铜不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工用ECuSn-CCu 237ECuAlAluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys.铝白铜  ，耐腐耐温性涂层涂层、耐蚀  ，力度高 。 铜和各种铝硬质碳素钢质钢属属材料不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工或堆焊用ECuAl-A2Aluminum alloys铝和各种铝硬质碳素钢质钢属属材料Al 109TAlPure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum.纯铝  ，耐蚀性好  ，但力度低  ，纯铝不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工用E1100Al 209TAlSiSilicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys.铝硅  ，抗裂性好  ，互通性大 。 铝和各种铝硬质碳素钢质钢属属材料不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工用  ，不应该不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工铝镁和各种铝硬质碳素钢质钢属属材料E4043Al 309TAMnManganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys.铝锰  ，力度高  ，耐蚀 。 铝和各种铝硬质碳素钢质钢属属材料不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工用E3003Nickel alloys镍和各种铝硬质碳素钢质钢属属材料Ni 102ENi-1Pure nickel. Welding and surfacing of nickel and nickel to steel.纯镍  ，用来镍、镍与钢的不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工与堆焊ENi-1Ni 207ENiCu-7Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel.镍铜  ，用来镍铜、镍铜与钢的不绣钢材质圆管不绣钢材质圆管不绣钢材质圆管点焊手工加工与堆焊ENiCu-7Category门类Trademark类型Chemical composition具体营养成分(%)Characteristics & application性质和使用Equivalent to AWS是一样的AWSHardfacing硬面堆焊S 101C3 Cr28 Ni4Si3.5 Fe Rem.HRc48-54. Resistance to wear, gas corrosion and oxidation. Hardfacing of bucket tooth and case pump.HRc48-54  ，耐腐耐温性涂层涂层、耐气蚀、抗老化的 。 堆焊铲斗齿  ，泵套S 111C1 Cr29 W5Co Rem.HRc38-47. Resistance to wear and corrosion at high-temperature. Hardfacing of high temperature and pressure valve.HRc38-47  ，常温天气下耐腐耐温性涂层涂层、耐蚀 。 堆焊常温天气超髙压髙压伐门ECoCr-AS 112C1.5 Cr29 W8Co Rem.HRc45-50. Resistance to wear and corrosion at high-temperature. Hardfacing of valve and hot-rolling pass.HRc45-50  ，常温天气下耐腐耐温性涂层涂层、耐蚀 。 堆焊髙压伐门  ，热扎钢板孔型ECoCr-BS 113C2.5 Cr30 W17Co Rem.HRc≥55. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of screw charging carriage.HRc≥55  ，常温天气下耐腐耐温性涂层涂层、耐温  ，但抗的冲刺性好 。 堆焊双螺旋上料功能机用S 114C2.5 Cr30 W12Co Rem.HRc≥53. Wear and heat resistance at high temperature, bad shock resistance. Hardfacing of three-cone bit.HRc≥53  ，常温天气下耐腐耐温性涂层涂层、耐温  ，但抗的冲刺也就不好 。 堆焊牙轮冲击钻头ECoCr-CCopperalloys铜和各种铝硬质碳素钢质钢属属材料S 201Sn1 Si0.3Mn0.3Cu Rem.Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper.机耐温性好  ，抗裂性好 。 红铜气焊及氩弧焊用ERCuS 211Si3 Mn1Cu Rem.Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel.机耐温性好  ，铜和各种铝硬质碳素钢质钢属属材料氩弧焊及钢的MIG钎焊用ERCuSi-AlS 212Sn5 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐耐温性涂层涂层性好 。 铜和各种铝硬质碳素钢质钢属属材料氩弧焊及钢的堆焊用ERCuSn-AS 213Sn8 Cu Rem.Wear resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐耐温性涂层涂层性好 。 铜和各种铝硬质碳素钢质钢属属材料氩弧焊及钢的堆焊用ERCuSn-CS 214Al7.5 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐耐温性涂层涂层、耐蚀 。 铜和各种铝硬质碳素钢质钢属属材料氩弧焊及钢的堆焊用ERCuAl-A1S 215Al9 Cu Rem.Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel.耐腐耐温性涂层涂层、耐蚀 。 铜和各种铝硬质碳素钢质钢属属材料氩弧焊及钢的堆焊用ERCuAl-A2S 221Cu60 Sn1 Si0.3Zn Rem.Melting point is about 890℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约890℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、碳钢S 221FCu60 Sn1 Si 0.3Zn Rem.S221 welding rod coated with flux.外涂焊剂的S221焊条S 222Cu58Sn0.9Si0.1Fe0.8 Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约880℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、碳钢RBCuZn-CS 222FCu58Sn0.9Si0.1Fe0.8 Zn Rem.S222 welding rod coated with flux.外涂焊剂的S222焊条RBCuZn-CS 223Cu59 Sn0.6Zn Rem.Melting point is about 900℃. Braze welding of copper, steel and cast iron.融点约900℃ 。 铜、钢、碳钢钎焊用RBCuZn-AS 224Cu62 Si0.5Zn Rem.Melting point is about 905℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点约905℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、碳钢Copperalloys铜和各种铝硬质碳素钢质钢属属材料S 225Cu48 Ni10Zn Rem.Melting point is about 935℃and high strength. Braze welding of steel, nickel and carbide alloys.融点约935℃ 。 高力度,钎焊钢、镍及硬性和各种铝硬质碳素钢质钢属属材料用RBCuZn-DS 225FCu48 Ni10Zn Rem.S225 welding rod coated with flux.外涂焊剂的S225焊条RBCuZn-DS 226Cu60 Sn0.3Si0.2 Zn Rem.Melting point is about 900℃. Gas welding of brass, also braze welding of copper, steel and cast iron.融点约900℃ 。 红铜气焊用  ，也可钎焊铜、钢、碳钢S 227Cu58Sn0.9Ni0.5Si0.1 Fe0.8Zn Rem.Melting point is about 880℃. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.融点880℃ 。 红铜气焊及碳弧焊用  ，也可钎焊铜、钢、碳钢RBCuZn-BS 229Cu55 Ni6 Mn4Zn余Melting point is about 920℃, high strength. Braze welding of steel, nickel and hard carbide.融点约920℃ 。 高力度,钎焊钢、镍及硬性和各种铝硬质碳素钢质钢属属材料用Aluminum alloys铝和各种铝硬质碳素钢质钢属属材料S 301Al≥99.5Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum.韧度好、耐蚀 。 纯铝气焊、氩弧焊用ER1100S 311Si5 Al Rem.Corrosion resistance, wide range of usage. Gas welding and argon arc welding of aluminum alloys other than high magnesium alloys.抗裂性好  ，互通性大 。 铝和各种铝硬质碳素钢质钢属属材料气焊、氩弧焊用 。 不应该用高镁和各种铝硬质碳素钢质钢属属材料ER4043S 321Mn1.3 Al Rem.Good corrosion resistance, weldability and ductility. Gas welding and argon arc welding of aluminum alloys.优质的耐蚀性、可焊性及韧度 。 铝和各种铝硬质碳素钢质钢属属材料气焊、氩弧焊用S 331Mg5 Mn0.4Al Rem.Corrosion resistance and high strength. Argon arc welding of aluminum alloys.耐蚀  ，力度高 。 铝和各种铝硬质碳素钢质钢属属材料氩弧焊用ER5183斯米克钎焊料分别为有：（铜锌钎焊料）  ，（铜磷银基钎焊料）  ，（铝基钎焊料）  ，（锡铅钎焊料）  ，（镍基钎焊料).简价以下的：Category门类Trade-mark类型Specification規格MeltingPoint融点(℃)Chemicalcomposition具体营养成分(%)Application使用Equivalentto AWS是一样的AWSCopperzinc铜锌L103Wire & rod丝885-888Cu54 Zn Rem.Brazing of copper, bronze and steel, subjected to low load.钎焊铜、白铜和钢等受压不是很大产品镗孔产品L104Foil箔890-930Cu57 Mn2Co2 Zn Rem.Brazing of carbide cutting tool.钎焊硬性和各种铝硬质碳素钢质钢属属材料高速钢锯片Copperphosphorus铜磷L201Cast rod, wire & rod, powder铸条、丝、粉710-800P7 Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料BCuP-2L204Cast rod, wire铸条、丝640-815P5 Ag15Cu Rem.Brazing of copper, copper alloys, silver and molybdenum etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、银、钼等各种铝硬质碳素钢质钢属属材料 。 BCuP-5L205Cast rod, wire & rod, powder铸条、丝、箔640-800P6 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料BCuP-3L207Cast rod, wire & rod铸条、丝640-770P7 Ag5Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料BCuP-7L209Cast rod, wire铸条、丝684-710P7 Ag2Cu Rem.Brazing of copper and copper alloys.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料 。 BCuP-6　Silverbase银基L302Wire & rod丝745-775Ag25 Cu40Zn Rem.Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等L303Wire & rod丝660-725Ag45 Cu30Zn余Brazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等BAg-5L303FFlux coated rod涂药丝660-725Ag45 Cu30Zn Rem.L303 coated with flux, the same application as L303.外涂钎剂的L303  ，使用与L303是一样的BAg-5L304Foil箔690-775Ag50 Cu34Zn Rem.Brazing of copper, copper alloys and steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢等BAg-6L308Wire & rod丝779-780Ag72 Cu Rem.Brazing of copper and nickel under vacuum or reducing protective atmosphere.铜和镍的进口真空箱或展现保护性措施操作氛围钎焊BAg-8L312Wire & rod丝595-605Ag40.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等L313Wire & rod丝625-635Ag50.Cu.Zn.CdBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等BAg-1aL321Wire & rod丝615-650Ag56.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等BAg-7L323Wire & rod丝665-755Ag30.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等L325Wire & rod丝645-685Ag45.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等BAg-36L326Wire & rod丝650-720Ag38.Cu.Zn.SnBrazing of copper, copper alloys, steel and stainless steel etc.钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管等BAg-34Aluminum base铝基L400Cast rod, wire & rod铸条、丝577-582Si11.5Al Rem.Brazing of aluminum and aluminum alloys.铝及铝和各种铝硬质碳素钢质钢属属材料的钎焊BAlSi-4L401Cast rod铸条525-535Si5 Cu28Al Rem.Brazing of aluminum and aluminum alloys.铝及铝和各种铝硬质碳素钢质钢属属材料的钎焊Tin lead锡铅L600Wire & rod丝183-185Sn60 Sb≤0.8Pb Rem.Soldering of fusible metals and heat-treated part.易熔各种铝硬质碳素钢质钢属属材料及热操作件的钎焊60SnL601Wire & rod丝183-227Sn18 Sb2Pb Rem.Soldering of copper, copper alloys and galvanized iron plain sheet.铜及铜和各种铝硬质碳素钢质钢属属材料、电镀锌钢板镀锌钢板铁的钎焊 。 18SnL602Wire & rod丝183-256Sn30 Sb2Pb Rem.Soldering of copper, brass, copper alloys and galvanized iron plain sheet.铜、红铜、铁、电镀锌钢板镀锌钢板铁的钎焊30SnL603Wire & rod丝183-235Sn40 Sb2Pb Rem.Soldering of copper, copper alloys, steel and zinc parts.铜及铜和各种铝硬质碳素钢质钢属属材料、钢、锌制部件的钎焊40SnL604Wire & rod丝183-222Sn90 Sb≤0.15Pb Rem.Soldering of copper and steel for food and medicine field.食材、医疗卫生想要铜、钢等各种铝硬质碳素钢质钢属属材料的钎焊90SnL605Wire & rod丝232-240Ag5 Sn95Soldering of copper and steel for electrical and food field.电气产品、食材想要铜、钢等各种铝硬质碳素钢质钢属属材料的钎焊L608Wire & rod丝295-305Sn5.5 Ag2.5Pb Rem.Soldering of copper, copper alloys, steel and stainless steel.铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管的钎焊Nickel base镍基L702Powder粉970-1000Cr7 B3 Si4Ni Rem.Brazing of stainless steel under vacuum or protective atmosphere.不绣钢材质圆管进口真空箱或保护性措施操作氛围钎焊BNi-2Category门类Trade-mark类型Product name名稱Characteristics & application性质和使用Gaswelding气焊CJ301Copper gas welding flux铜气焊熔剂Melting point is about 650℃, flux for gas welding and brazing of copper and copper alloys.融点约650℃  ，铜及铜和各种铝硬质碳素钢质钢属属材料气焊或钎焊的助熔剂CJ401Aluminum gas welding flux铝气焊熔剂Melting point is about 560℃, flux for gas welding of aluminum and aluminum alloys.融点约560℃  ，铝及铝和各种铝硬质碳素钢质钢属属材料气焊的助熔剂Silverbrazing银钎焊QJ101Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃比率钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管的助熔剂QJ102Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃比率钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管的助熔剂QJ102ASilver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃. Non agglomeration.在600-850℃比率钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管 。 不会结坨QJ112Silver brazing paste flux膏状银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 600-850℃.在600-850℃比率钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管的助熔剂QJ103Silver brazing flux银钎焊熔剂Brazing flux of copper, copper alloys, steel and stainless steel within 550-750℃.在550-750℃比率钎焊铜及铜和各种铝硬质碳素钢质钢属属材料、钢及不绣钢材质圆管的助熔剂Aluminum brazing铝钎焊QJ201Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 450-620℃.在450-620℃比率钎焊铝及铝和各种铝硬质碳素钢质钢属属材料的助熔剂QJ207Aluminum brazing flux铝钎焊熔剂Brazing flux of aluminum and aluminum alloys within 560-620℃.在560-620℃比率钎焊铝及铝和各种铝硬质碳素钢质钢属属材料的助熔剂Category门类Trade-mark类型Chemicalcomposition化学反应营养成分(%)Hardness抗拉强度Application使用　Oxy-AcetyleneFlamespray-using氧乙炔焰喷焊F103Cr10 B1.5 Si3 Ni Rem.HRc 25Spray-fusing of cast iron parts,,, such as die for glass, cylinder, and guide.碳钢件的喷焊  ，如玻离冲压模貝  ，汽缸、导轨F101Cr10 B2.5 Si3 Ni Rem.HRc 45Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.耐腐耐温性涂层涂层、耐蚀件的喷焊  ，如髙压伐门、泵叶轮、泵轴向液压泵泵F101FeCr10 B2.5 Si3 Fe10Ni Rem.HRc 45Spray-fusing of corrosion-resistant parts, such as axle and stigma.耐腐耐温性涂层涂层件的喷焊  ，如轴类、汽门F102Cr16 B4 Si4 Ni Rem.HRc 60Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.耐腐耐温性涂层涂层、耐蚀、抗常温天气硫化的产品镗孔产品的喷焊  ，如冲压模貝、轴向液压泵泵F102FeCr16 B4 Si4 Fe15Ni Rem.HRc 60Spray-fusing of corrosion-resistant parts, such as axle and cold die.耐腐耐温性涂层涂层件的喷焊  ，如轴类、冷冲压模貝F105F102+50%WCHRc 60Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.抗磨砂颗粒有损坏情况时候的喷焊  ，如导板、刮刀、通制冷机嫩叶F105FeF102Fe+35%WCHRc 60Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.抗磨砂颗粒有损坏情况时候的喷焊  ，如导板、刮刀、通制冷机嫩叶F108F102+80%WCHRc 60Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.抗猛烈磨砂颗粒有损坏情况  ，不需操作时候的喷焊  ，如挖泥船耙齿F301Cr5 B4 Si4 Ni30Fe Rem.HRc 45Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.农机车,矿山开采机易损件的喷焊  ，如网址ju111十年信誉备用轴  ，车轴Track iron powder轨铁粉Cr5 B1.5 Si3 Ni30Fe Rem.HRc 28Repair spray-fusing of defects such as scratch and concavity of railroad track.电气化铁路铁轨划伤、低塌等偏差的修补喷焊Oxy-acetylene flame spraying氧乙炔焰静电喷砂F111Cr5 B1.5 Si3 Ni30Fe Rem.HB 150Spraying of bearing and cutting parts etc.联轴器、切屑件等的静电喷砂F113Cr10 B1.5 Si3 Ni Rem.HB 250Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.静电喷砂还可喷焊  ，如滚桶、轴向液压泵泵、耐蚀耐腐耐温性涂层涂层轴等F313Cr15 B1.5 Fe Rem.HB 250Spraying of dryer of papermaking and axle.造纸厂烘缸、轴类的静电喷砂F314Cr18 Ni9 B1.5 Fe Rem.HB 250Spraying of axle.轴类静电喷砂F412Sn10 P0.3 Cu Rem.HB 80Spraying of axle and bearing.轴、联轴器的静电喷砂F512挽回Al5Ni95Backing spray of transition layer between base and working layer.静电喷砂层的基体与操作层互相过渡性（底妆）层用静电喷砂PTAhardfacing等化合物弧喷焊F221Cr26 W5 B0.7 Co Rem.HRc 43PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.常温天气超髙压髙压伐门密封面、热截段刃口的等化合物喷焊F223Cr21 W5 B1.5 Co Rem.HRc 40PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.常温天气下耐腐耐温性涂层涂层耐蚀件的喷焊  ，如常温天气超髙压髙压伐门、鼓通制冷机F321Cr13 B1.5 Si1 Fe Rem.HRc 45PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.中温中压髙压伐门的闸板极其他耐腐耐温性涂层涂层件的等化合物喷焊F322Cr23 Ni13 Si5 B1Fe Rem.HRc 40PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.中温中压髙压伐门的阀球极其他耐腐耐温性涂层涂层件的等化合物喷焊F422Sn10 P0.3 Cu Rem.HB 80PTA hardfacing of axle and bearing etc.轴、联轴器等化合物喷焊